Dry Packaging
Baking Services and Dry Packing of components
Action Circuits have the facility to moisture bake and repackage devices. Our electronic component dry packaging service allows us to bake any electronic devices as required, however industry standard times and temperatures range from 6 hours at 125deg C to 24hrs at 125deg C. Equally we can carry out a 12hr bake or a 6hr bake, or at a reduced temperature for longer periods.
In surface mount technology (SMT), semiconductor devices are soldered on to the surface of PCB’s, using processes that expose the devices to temperatures between 210 C and 260 C, for a relatively long time (4 to 60 seconds). Due to this high temperature shock, in the early period of SMT a wide number of Surface Mount Devices showed severe damage after the process. The largest PLCC and SO devices could explode like popcorn, and this phenomenon became known as the popcorn effect. Devices are now produced using packaging techniques to avoid this effect, however moisture retention in the package can still cause excessive mechanical stresses during the soldering process, causing cracks and delaminating. In some cases when this damage affects critical areas, long term reliability may be compromised.
Although new moulding compounds have been developed by the semiconductor industry, in a number of SMD’s it is still necessary to control the moisture content in the encapsulation, upto the moment that they are submitted to the soldering process.
This control is obtained by shipping and storing sensitive SMD’s in moisture barrier bags. They are hermetically sealed and can control the moisture absorption from the ambient environment, thus maintaining the devices in a dry condition until used.
A major point is to quantify the shelf life of the device once it is removed from the sealed bag. This is a most important consideration when processing devices prior to assembly (soldering).
Our procedures are based on the EIA JEDEC standard JESD22-A112, and International Standard STD020, which define six levels of moisture sensitiveness.
At Action Circuits we operate very strict component handling procedures, which incorporate dry packing / moisture control systems to ensure that all device exposure time is recorded.
In addition to our baking and vacuum packing services we stock a large selection of ESD packaging materials which are available to purchase.
Request a call back from one of our team here.